The Suspension Tubes act as the basic framework of the Lift Shaft Gate and are held in place by the fixing brackets.
SUSPENSION TUBE 200
• 5071202
• 15.6 kg
• hot-dip galvanised (HDG)
• 2060 x 200 mm
SUSPENSION TUBE 400
• 5071203
• 23.4 kg
• hot-dip galvanised (HDG)
• 2060 x 400 mm
SUSPENSION TUBE 1050
• 5071204
• 34 kg
• hot-dip galvanised (HDG)
• 2060 x 1050 mm
The Gap Covers close any gaps between the lift shaft door and the top edge of the shaft opening.
GAP COVER 200
• 5071211, 5071212, 5071213, 5071214
• 0.5 kg, 0.9 kg, 2.0 kg , 2.2 kg
• powder-coated
• 200 x 200 mm
GAP COVER 400
• 5071211, 5071212, 5071213, 5071214
• 0.5 kg, 0.9 kg, 2.0 kg , 2.2 kg
• powder-coated
• 200 x 400 mm
GAP COVER 980
• 5071211, 5071212, 5071213, 5071214
• 0.5 kg, 0.9 kg, 2.0 kg , 2.2 kg
• powder-coated
• 200 x 980 mm
GAP COVER 1050
• 5071211, 5071212, 5071213, 5071214
• 0.5 kg, 0.9 kg, 2.0 kg , 2.2 kg
• powder-coated
• 200 x 1050 mm
The Panels are attached to the hanger beams in the same manner as the Door. Different width options that can be combined to customize the set up for the intended shaft opening.
• 5071202 / 5071203 / 5071204
• 15.6 / 23.4 / 34 kg
• hot-dip galvanised (HDG)
• 2060 x 200 / 400 / 1050 mm
The lower Fixing Bracket is anchored to the wall from the outside or inside and holds the upper suspension tube. Two lower fixing brackets are required per Lift Shaft Gate.
• 5071210
• 0.6 kg
• powder-coated
• 100 x 100 mm
The upper Fixing Bracket is anchored to the wall from the outside or inside and holds the upper suspension tube. Two upper fixing brackets are required per Lift Shaft Gate.
• 5071209
• 0.5 kg
• powder-coated
• 80 x 100 mm
The Lift Shaft Door can be opened as a whole or only the upper half of the door. The integrated triangular lock prevents unauthorised entry or accidents.
• 5071201
• 39.3 kg
• EN 13374, class A
• hot-dip galvanised / powder-coated
• 2060 x 980 mm
The Trench Bridges ensure a safe crossing over open channel trenches. They are made of steel with non-slip treads. This allows unrestricted business operations during construction work. All trench bridges are flexibly implementable and convertable.
Each Trench Bridge carries 5 kN/m². The Trench Bridges are available in 5 lengths as standard, from 2 m total length up to 8 m. Pre-assembled crane hooks allow safe craning and positioning above the trench or excavation. Following the consistent modular principle, all individual parts of the Trench Bridges are replaceable in case of damage. All Trench Bridges are available with handrails.
• 5062080N
• 743 kg
• EN 12811
• hot-dip galvanised (HDG)
• 7990 x 1141 mm
The Trench Bridges ensure a safe crossing over open channel trenches. They are made of steel with non-slip treads. This allows unrestricted business operations during construction work. All trench bridges are flexibly implementable and convertable.
Each Trench Bridge carries 5 kN/m². The Trench Bridges are available in 5 lengths as standard, from 2 m total length up to 8 m. Pre-assembled crane hooks allow safe craning and positioning above the trench or excavation. Following the consistent modular principle, all individual parts of the Trench Bridges are replaceable in case of damage. All Trench Bridges are available with handrails.
• 5062060N
• 465 kg
• EN 12811
• hot-dip galvanised (HDG)
• 6090 x 1141 mm
The Trench Bridges ensure a safe crossing over open channel trenches. They are made of steel with non-slip treads. This allows unrestricted business operations during construction work. All trench bridges are flexibly implementable and convertable.
Each Trench Bridge carries 5 kN/m². The Trench Bridges are available in 5 lengths as standard, from 2 m total length up to 8 m. Pre-assembled crane hooks allow safe craning and positioning above the trench or excavation. Following the consistent modular principle, all individual parts of the Trench Bridges are replaceable in case of damage. All Trench Bridges are available with handrails.
• 5062040N
• 263 kg
• EN 12811
• hot-dip galvanised (HDG)
• 4063 x 1137 mm
The Trench Bridges ensure a safe crossing over open channel trenches. They are made of steel with non-slip treads. This allows unrestricted business operations during construction work. All trench bridges are flexibly implementable and convertable.
Each Trench Bridge carries 5 kN/m². The Trench Bridges are available in 5 lengths as standard, from 2 m total length up to 8 m. Pre-assembled crane hooks allow safe craning and positioning above the trench or excavation. Following the consistent modular principle, all individual parts of the Trench Bridges are replaceable in case of damage. All Trench Bridges are available with handrails.
• 5062030N
• 190 kg
• EN 12811
• hot-dip galvanised (HDG)
• 2935 x 1137 mm
